Skip to main content
Skip to primary sidebar
Skip to footer

We make CNC machined parts in all sizes and materials

530-762-2118 | info@rfrcustomfab.com

Facebook
Instagram

Job Shop
- FAQs

JOB SHOP GALLERY

Six Operation Ultem 1000 part

Six Operation Ultem 1000 part detail

Six Operation Ultem 1000 part – Red arrow indicates .002” thick wall between hole and edge, Green arrow indicates .002” thick floor of pocket

1018 Mild Steel part with Thread Milled hole

Polycarbonate (Lexan) part

Anodized 6061 Aluminum parts – 10,000 main parts and 20,000 end caps made

Miniature end caps with 0-80 holes. Parts are .100” thick.

Production run of Ultem 1000 parts

303 Stainless Steel part

360 Brass part.

3D machined aluminum part. Design by IronWorks

Ultem 1000 part. Vertical pocket walls are .014” (.356mm) thick.

Brass threaded insert installed in part. Location tolerance +/-.001”, depth tolerance +/-.004”

17-4 Stainless Steel, 360 Brass, 110 Copper and 6Al4V Titanium spinner bases

Type II anodized 6061 aluminum part

Custom logo

Micro Machining, Ultem 1000. Legs pointing toward you are .012” thick, and tolerance from face to top of angled latches is +/-.001”

303 Stainless Steel parts. Flat face toleranced Flat to .001” or less. 20,000 of these made.

Micro Machined 6061 plug for vacuum fixture.

440C Stainless Steel production part.

3D machined Ultem 1000 part.

Anodized Aluminum part with Stainless Steel dowel pins installed. Pocket width is +.001” / -0.

Ultem 1000 part. Slots are +.002” / -0. Angled lock to flat face is +/-.001”

Clear Alodine (AKA Chem Film, Cr03 or Trivalent Chromate) 6061 part. All hole locations +/-.0008”. Ø.0275” holes are +/-.0005” and 20xD deep. Ø.0975” holes are +/-.0005” and have a Ø.1010” counterbore that is +/-.001” and has a 10º lead in to the thru hole.

Ultem 1000 part with .008” wide x .036” deep slots.

Thin Ultem 1000 part. .039” thick, both main faces must be parallel to less than .001”.

Production 1018 and 4140 Steel parts. Machined, tumbled, then shipped via LTL freight monthly.

Ultem 1000 part, assembled with dowel pins. Aside from the bolt holes, the loosest tolerance on this entire part is +.002” / -0.

Oooooh, shiny! 6061 part straight off the machine.

Footer

Products
Job Shop Gallery
Job Shop

© 2024 RFR Custom Fab | 1115 East Ewald Ct., Suite A, PARADISE, CA. 95969 | 530-762-2118 | info@rfrcustomfab.com